Best headers 1969 z28 oem

[Lee Stewart]

Factory Z/28 headers

[mhm1966]

Lee,

Do the collector flanges have three or four bolt pattern?

[Lee Stewart]

Originally Posted by mhm1966

Lee,

Do the collector flanges have three or four bolt pattern?

What you see is what you get

[Billohio]

top one appears to have 4

[169indy]

Originally Posted by 1967Z28

When Jere Stahl built headers in the late '60s he used the same upper flanges that were used on the '67 Camaro factory headers made by Bill Thomas/Douglass Muffler Mfg. The upper flanges changed in the '70s. The Stahl headers (now ACP) are premier headers but they do not resemble the factory headers used on Camaros back in the late '60s. Larry Christensen was reproducing the factory OEM style headers as recently as a couple of years ago but I'm not sure if he still is.

YUP!

Re-pops! (1968 version Kustom 4 hole flanges)

[x33rs]

Originally Posted by 1967Z28

When Jere Stahl built headers in the late '60s he used the same upper flanges that were used on the '67 Camaro factory headers made by Bill Thomas/Douglass Muffler Mfg. The upper flanges changed in the '70s. The Stahl headers (now ACP) are premier headers but they do not resemble the factory headers used on Camaros back in the late '60s. Larry Christensen was reproducing the factory OEM style headers as recently as a couple of years ago but I'm not sure if he still is.

Last time I talked to him he still was. I should say he has someone do them for him, but they are specifically for 67-68. When I asked he was hesitant to tell me if they fit 69's with back drive linkage. My feeling from that conversation was that they do not, if they did I felt he would have just said so. With all the 69's he's had or has, he would have known.

Thought we had a conversation about this a while back and I posted his contact info then. If back drive linkage isn't a concern, then the 68 style he offers look good from what I've seen of them. I only mention this because OP's question is for a 69.