![]() |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
This hood came off a 68 427 car. I have a strong feeling that this is a 68 hood or at least a very early piece as it is not made using matting, but rather chopper gun. It has a crude’er looking inner structure with gaps at each direction change rather than the continuous non segmented structure seen on other hoods. Lastly, the humps where hinge bolts up are small opposed to the rectangular slender pads seen on other hoods. These are my observations. This hood also had evidence that it had the chrome insert in opening used on Vette. Now, looking for members that know these hoods and their assessment to what it is. Thanks sYc.
__________________
69 SS/RS 396 M20 X22 Nor 12B,72B,712 bought 1979 FULL OWNER HISTORY 69 Dick Harrell tribute Day II 427 M20 4.10 X11 76 orig pnt, 711 67 Super Stock 302 Camaro re-creation |
#2
|
|||
|
|||
![]()
First, the hood has a scoop from the year of 1967. Second, the fiberglass on the underside of the hood is not press-molded. All factory hoods were press molded.
|
The Following User Says Thank You to mhm1966 For This Useful Post: | ||
bbbentley (03-07-2022) |
#3
|
||||
|
||||
![]()
It’s identical to mine but your underside is a little rougher than mine. I think these hoods were made by Harwood as per info I’ve received here on the site of a hood sold by RobR couple or three years ago.
I’ll post up some pics of mine later.
__________________
Richard 1967 Camaro SS 396/375 4K 2002 Camaro 35 Anniversay Z4C-WU8 |
![]() |
|
|