|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Thrust button for hydraulic roller - stock appearing
Hi folks,
I am building a somewhat stock appearing SBC with a hydraulic roller. Has anyone had any luck getting a factory stamped timing cover to work? Thanks! |
#2
|
|||
|
|||
Both my roller cam motors have stock timing covers.
No issues with either one.
__________________
Don't believe everything you read on the internet ... Ben Franklin |
#3
|
|||
|
|||
I use the stock timing covers on both SBC's and BBC's here with rollers. Works fine. As long as end play is where it needs to be, all good.
|
#4
|
||||
|
||||
Great. Which timing set and button type are you using?
|
#5
|
||||
|
||||
I made a bracket that bolts to the back of the water pump with a preload bolt that pushes against the timing cover to set end play and support the cover.
__________________
Freddie 1969 Camaro RS/SS396 (427) 4 speed |
|
|