View Single Post
  #3  
Old 12-05-2017, 03:40 PM
Verne_Frantz Verne_Frantz is offline
Senior Member
 
Join Date: Jul 2003
Location: Central New Jersey
Posts: 3,793
Thanks: 34
Thanked 240 Times in 123 Posts
Default

Quote:
Originally Posted by Crossbreed383 View Post
Find true top center of cyl#1 and zero degree wheel
Dial indicator on #1 intake lifter and rotate engine to find max lobe lift
Zero indicator at max lift
Rotate additional .050" and mark wheel
Rotate counter clockwise to .070" to remove chain slack and then back to clockwise to .050"
and mark wheel
Add 2 #s together and divide by 2
This is how we do all the engines at our shop and how I tell all my cam customers to do it regardless of cam type
Remember you must use a SOLID LIFTER during this exercise sir
Thanks
Nick @ Brian Tooley Racing

OK, So your suggestion is to do it at .050" lobe lift, centered between opening and closing. Thanks. I'll check that and see how it compares to using the two max lift points.

Verne
Reply With Quote