Need Member Rides for spotlight

[Hemicolt]

Thanks.
The block is a 10.2 deck Merlin. 4.5 bore and 4.25 stroke. Flat top JE pistons on 6.800 rods. Cam is a custom roller designed by Kirk Jager and Chris Straub and ground at Bullet, .720 lift. And I promise the following is true,( I get accused of running painted aluminum heads..lol ), the heads are stock LS6 cast iron. The intake is a Brodix HVH with a Pro Systems 1100 Dominator. The reason I point this out about the heads is because the motor made 704 h.p. on pump gas. We tricked the heads into thinking the exhaust flow is better than it really is, using the cam profile.
The first time I had the motor together it made 670 h.p., but I had a ring problem and took it back down. By changing the rings and rehoning the block, it picked up 34 h.p.



<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: olredalert</div><div class="ubbcode-body">----Chandler,,,There are a few (maybe more than a few) loose wingnuts on this site. As much attention as your fine 64 will attract,,,be ready for a few more wise cracks. As for me, I just want to know a bit more about that motors internals as it looks as if it can definetly haul the bacon!!!......Bill S </div></div>