Show us your shop!

[NorCam]

Back to work on getting my work shop finished up and organized. After painting and doing my bench top, it was finally time to start plumbing some new air lines using 1/2" black pipe. Comes out of the compressor and feeds a regulated oil fed line (left) with one outlet by the counter top, and one up to a ceiling mounted hose reel that will go just above the back corner of the lift on Friday.

The other feed goes immediately up to the right of the compressor and tomorrow that line will go right across the top to the other side of the shop where it drops down to a clean trio of water traps with desiccant filter before going out to my paint room and sand blast cabinet. I have have three water drop traps for bleeding off any moisture and I hope to have it all finished by Friday night or Saturday AM.

Also ran another comms cable out yesterday and installed a shop phone to pickup my business lines so I can answer business calls when out working on my project cars. Gotta stay connected to keep business rolling along.