As I suspected I had a vacuum problem similar to the transmission not upshifting issue. I was able to re-connect the vacuum line from the firewall check valve that controls the dash HVAC controls to manifold vacuum. Only issue now is that I have a vacuum line from the evaporative control canister small line on the top of the picture) that I don't know where the other end should connect to (it previously was connected to the previously mentioned firewall check valve).
Any ideas on where that should end up - it says carb on the canister, so maybe I need another tee..........? I searched the assembly manual with no luck.
|
06-12-2022, 02:29 AM
Threaded Mode