|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Need help identifing this muncie!
Guys I have this muncie and need help identifing.May be for sale. Thanks Sidecover 3831707. stamp P8m29{}.18B114807.Case 3925660.Tail 3846429.Has course imput w/rings.Thanks as always what a GREAT site.You've helped so much.Tribute car almost finished.Look at pics below my signiture. Mark B.
__________________
1969 CAMARO X11 YENKO TRIBUTE CAR HUGGER ORANGE 1971 MONTE CARLO ORANGE AS WELL |
#2
|
||||
|
||||
Re: Need help identifing this muncie!
Strange mix of parts. The side cover and tail casting are from a 1965 Muncie. The case casting date is Aug. 29, 1968.
The "13" is (1)Chevy,"3" (not 8) Chevelle, "B" Baltimore, MD assembly plant, 114807 is the VIN, and 3925660 was used for all Muncie 4 speeds. As they say, parts is parts. Thanks to Covin's Chevrolet by the Numbers. Andy
__________________
COPO 9561/9737 M40 X11D80 13.37 @ 105.50 on pump gas,drove it to NATL TRAILS and back [email protected] SCR22 |
#3
|
|||
|
|||
Re: Need help identifing this muncie!
Mark, sounds like you have a can of worms there. Main case assembled 1968 model year put in a Chevelle, with a 1963 1/2-1965 707 side cover with a 429 tail housing 1964-mid 65 Chevys and also Pontiac A-body's thru the 1970 model year.
But all these parts will work together, as long as the gears and sycro are in good shape. The number of rings on the input can usually tell the gear ratio...Hope this helps...Crash |
#4
|
|||
|
|||
Re: Need help identifing this muncie!
Andy, 660 main case was used 1968-69 and the first half of the 1970 model year. Not all...Crash
|
#5
|
|||
|
|||
Re: Need help identifing this muncie!
[ QUOTE ]
The "13" is (1)Chevy,"3" (not 8) Chevelle, [/ QUOTE ] I would agree with the partial Vin being "18", "1" for Chevrolet and "8" for 1968 model year.
__________________
Russ |
#6
|
||||
|
||||
Re: Need help identifing this muncie!
OK. I can see your point. The VIN on the car itself would be 13xxx8Bxxxxxx. As we all noticed, this tranny was not put together at the factory like this.
Andy
__________________
COPO 9561/9737 M40 X11D80 13.37 @ 105.50 on pump gas,drove it to NATL TRAILS and back [email protected] SCR22 |
#7
|
|||
|
|||
Re: Need help identifing this muncie!
NOT TO BE A KNOW IT ALL BUT HERE IS HOW THE TRANS. BREAKS DOWN. P8M29-p- PONTIAC(GTO)8- 1968 M-AUG. 29-DAY THE LAST LETTER IS A,B,C, A=M20 B=M21 C=M22 YOU DID NOT POST THE LAST LETTER HOPE THIS HELPS!!! THE CASE # AND TAIL CASTING # DID COME TOGATHER BUT THE SIDE IS INCORRECT IT CAME OUT OF A 1969 GTO.
|
#8
|
||||
|
||||
Re: Need help identifing this muncie!
Hello Tony and welcome to the site but quit yelling (cap locks).
Where abouts in MN are you? Nice to see another Minnesotan. Rick |
#9
|
|||
|
|||
Re: Need help identifing this muncie!
Hi Rick , Sorry about the capital letters . Northfield , 20 minutes south of Burnsville. GO VIKES !! Yes, I'm Yelling that. Tony
|
#10
|
|||
|
|||
Re: Need help identifing this muncie!
The A B C ratio indicator didn't start to be used until the 1969 model year (Oct 21 1968)... Crash
|
|
|