|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
'69 Camaro Exhaust Recommendations
I need a new exhaust for my '9 BB Camaro. I'm running headers and am looking for performance and not a restoration exhaust.
The one thing I would like is a crossflow muffler as I find everything else hangs too close to the ground. Any suggestions?
__________________
Thomas Schilf '69 Camaro SS, L78, M22, 4.10 Posi '69 Camaro E/SA '00 Camaro SS Convertible '04 Harley FXST '80 Chevy Blazer (My first new vehicle) |
#2
|
|||
|
|||
Re: '69 Camaro Exhaust Recommendations
I went throught this entire drill myself.
I cant talk about Horsepower gains and losses, but I can talk about fit. I bought the MAGNAFLOW 2 1/2" Mandrel Bent,Stainless, Crossflow, X-pipe, system. I had problems getting it to fit out of the box, but MAGNAFLOW worked with me. I can send you misc pics. As I'm still finishing underfloor cleanup and paint, I cant show you finished installed The MAGNAFLOW system has tailpipes, ala 67/68. I plan on doing a custom welded extension to replicate the 69' style. PYPES offers a slip on extension to replicate the 69 "Look" The next alternative is the PYPES system, but I investigated and found the MAGNAFLOW to come with better hangars, better clamps, and better fit Third alternative is FLOWMASTER. With their single crossmount muffler. The exhaust pipes enter the front side and exit the ends of the muffler. regards,
__________________
Chuck Sharin [email protected] Auburn,WA (30 miles South of Seattle) 70 Camaro R/S Z-28, L-78, R/S SS 69 Camaro COPO "recreation" |
#3
|
|||
|
|||
Re: '69 Camaro Exhaust Recommendations
[ QUOTE ]
I went throught this entire drill myself. I cant talk about Horsepower gains and losses, but I can talk about fit. I bought the MAGNAFLOW 2 1/2" Mandrel Bent,Stainless, Crossflow, X-pipe, system. I had problems getting it to fit out of the box, but MAGNAFLOW worked with me. I can send you misc pics. As I'm still finishing underfloor cleanup and paint, I cant show you finished installed The MAGNAFLOW system has tailpipes, ala 67/68. I plan on doing a custom welded extension to replicate the 69' style. PYPES offers a slip on extension to replicate the 69 "Look" The next alternative is the PYPES system, but I investigated and found the MAGNAFLOW to come with better hangars, better clamps, and better fit Third alternative is FLOWMASTER. With their single crossmount muffler. The exhaust pipes enter the front side and exit the ends of the muffler. regards, [/ QUOTE ] Do any of these fit with the stock hangers?
__________________
Thomas Schilf '69 Camaro SS, L78, M22, 4.10 Posi '69 Camaro E/SA '00 Camaro SS Convertible '04 Harley FXST '80 Chevy Blazer (My first new vehicle) |
#4
|
|||
|
|||
Re: '69 Camaro Exhaust Recommendations
Pypes performance exhaust. http://www.pypesexhaust.com/
Have used exhaust systems from this vendor on 70 Nova, 69 Camaro, and so on. Good fitment, solid work, and great sound. Maybe a bit work on the center x pipe will even improve ground clearance. Great value for the buck in my opinion. Nils |
#5
|
|||
|
|||
Re: '69 Camaro Exhaust Recommendations
This is what I did to my 69 Z, maybe an idea for you.
My car has some old school headers. So we ran 2.5 all the way to a flowmaster crossflow muffler. Then we ran 2.5 from the crossflow to the factory style tail pipes. The entire system was set up with the factory hangers. It looks very stock, but of course flows much better than one of the resto exhaust system and sounds awesome. For performance you would of course want to use 2.5 tailpipes. |
#6
|
|||
|
|||
Re: '69 Camaro Exhaust Recommendations
From experience, the DynoMax or Pypes crossflow muffler will perform better than the Flowmaster crossflow...on our Camaro that we race in Pure Stock [exhaust manifolds], we started with the factory chambered, went to 2.5" mandrel with Flowmaster crossflow & Dr. Gas x-pipe, then to the Pypes 2.5" mandrel with Pypes crossflow & Pypes x-pipe...picked up each time, and shockingly we picked up well over 1mph when we switched from Flowmaster-->Pypes. 2.5" mandrel head pipes are the key, and tail pipe size is last on the list...as long as the tail pipes are mandrel bent you should be fine with 2.25", as the gases have cooled significantly by that point and don't need quite the volume as up front...
|
#7
|
|||
|
|||
Re: '69 Camaro Exhaust Recommendations
i saw a set up at a show that is OVAL SHAPED for clearance. the company was called RAM AIR RESTORATION. i don't know anyone who's used it.
|
#8
|
|||
|
|||
Re: '69 Camaro Exhaust Recommendations
|
#9
|
|||
|
|||
Re: '69 Camaro Exhaust Recommendations
I appreciate all the input I have received from everyone.
So far it looks like I can get the best deal on a Flowmaster kit with the Crossflow muffler - $550 Cdn. I can not find anyone who deals in Pypes here in Canada. I have sent them a message asking whether they have any dealers in the Great White North, but have not hear back yet. I am going to the Ontario Camaro Show this weekend and will look how some of these systems fit. There are so many choices and hopefully that will help me decide.
__________________
Thomas Schilf '69 Camaro SS, L78, M22, 4.10 Posi '69 Camaro E/SA '00 Camaro SS Convertible '04 Harley FXST '80 Chevy Blazer (My first new vehicle) |
#10
|
|||
|
|||
Re: '69 Camaro Exhaust Recommendations
Isn't Pypes the same outfit as Performance Years? Im sure the ship every place...
|
|
|